Home › Patio Screening Installation
Transform your outdoor space with patio screening in Melbourne, FL. We enclose open patios with custom aluminum frames and durable mesh to block insects and debris. Enjoy more shaded, comfortable outdoor living while keeping a clear view of your yard.
Melbourne Screening provides professional patio screening throughout Melbourne, FL, Florida and the surrounding area. Our licensed, insured crew delivers safe, clean, on-time work with a free estimate before anything begins. Call 321-449-7928 or request your free quote.
Patio screening that fits Melbourne, FL living
If you use your patio a lot but bugs and blowing debris keep cutting your evenings short, patio screening can be a big quality of life upgrade. At Melbourne Screening, we design and install screened patios that work for real Florida life, not just pretty photos.
Our team focuses specifically on the Melbourne, FL climate and building conditions. That means screening that can handle salt air from the river and coast, sudden summer storms, strong sun, and year-round use. We look at how the sun hits your patio, the direction of the prevailing wind, and how close you are to the water or wetlands so we can recommend the right screen material and frame design.
Whether you already have a covered patio that just needs walls screened in, or you are starting from a concrete slab and want a full aluminum frame structure, we install systems that feel like a natural extension of your home. We can usually tie into existing roof lines, fascia, or structural posts, which keeps the look clean and helps control cost.
From the first visit, we walk your patio with you, talk about how you actually use the space (evening dinners, pets, plants, TV area, hot tub), and tailor the screening and layout to those priorities. That way you are not just getting “a screen enclosure,” you are getting a patio you can comfortably use almost every day of the year.
How our patio screening installation process works
A good patio screening project in Melbourne starts long before we bring out ladders. Melbourne Screening follows a step-by-step process so there are no surprises for you.
1. On-site consultation and measurements: We come to your home, take laser measurements of the patio area, soffit heights, and any columns or railings, and check the existing concrete or pavers for slope and cracks. We note sprinkler locations, gutters, and power outlets so the screen frame and doors do not interfere with anything you use.
2. Design and layout: Based on your goals, we sketch the panel layout (the grid of vertical and horizontal frame members), door locations, and any kick plate or solid lower panels. For example, if you have small dogs, we often recommend a 16 or 18 inch solid aluminum kick plate along the bottom to protect the screen from claws and yard tools. For patios exposed to strong winds from the east, we may tighten post spacing or add an extra horizontal support.
3. Material selection: Next we help you choose the actual screening and frame finish. Common options include standard 18/14 insect screen for basic bug control, tighter 20/20 mesh for no-see-ums and sand flies (very useful near the Indian River or wet areas), and heavier “pet screen” that resists tears from dogs and kids. Frames are typically white or bronze powder-coated aluminum, which stands up well to Florida humidity and sun.
4. Permitting and HOA coordination: For most simple patio screen conversions, the permitting is straightforward, but Melbourne Screening still checks City of Melbourne and Brevard County requirements. If your HOA needs drawings or color samples, we can provide those so approvals go smoothly.
5. Fabrication and installation: We pre-cut and assemble as much as possible in our shop, then bring the sections to your home. On site, we secure the frame to the slab with concrete anchors, attach to the house structure at approved fastening points, and carefully square everything before screening. The screen fabric is rolled into place using spline so it is tight but not overstressed, which prevents early sagging.
6. Final walkthrough and tips: When we are done, we walk the enclosure with you, test the doors and latches, and review drainage and cleaning tips. We point out where we placed expansion joints or sealant so you know what is normal as everything settles through a few Florida rainy seasons.
Material and design choices that affect cost and performance
Two patios the same size can have very different pricing, and we want you to understand why. During your estimate, Melbourne Screening will break down the choices so you can see what matters most for your budget and how you plan to use the space.
Screen type: Standard fiberglass insect screen is the most budget friendly and works well for many Melbourne neighborhoods. If you live near water or have lots of gnats, a finer no-see-um mesh costs more but dramatically improves comfort. Pet-resistant screens use thicker fibers and are more expensive, but can pay off if you have large dogs that lean or jump against the screen.
Frame style and height: A simple straight-across wall under an existing roof costs less than a full-height panoramic screen wall with minimal supports. Taller enclosures, like converting a two-story patio or adding a gable roof extension, require more aluminum and more labor. In hurricane-prone coastal Florida, we size posts and fasteners to meet wind-load requirements, which can add material compared with generic kits.
Doors and access: Every screened patio needs at least one door to the yard. Adding extra doors for pool access, side yard, or grill area adds to the cost because each door section has its own framing and hardware. We can also install wide doors or double doors if you want to move large furniture, but those require additional structural support.
Lower wall options: Leaving the screen panel all the way to the floor is simplest. However, many Melbourne homeowners prefer aluminum kick plates, vinyl panels, or even fiber-cement knee walls to block mulch, grass clippings, and pressure from kids and pets. These upgrades add both durability and cost.
Existing surface condition: A clean, level concrete slab makes installation straightforward. Cracked, heavily sloped, or loose pavers may need repairs or a concrete footer before we install. We will point out any surface issues during the estimate so they do not surprise you later.
Hardware and fasteners: In coastal Florida, using stainless or coated fasteners is crucial to reduce rust. Melbourne Screening specifies corrosion resistant screws, anchors, and hinges because cutting corners here leads to staining on your slab and premature failures a few years down the road.
What Melbourne, FL homeowners should know before installing patio screening
Before you commit to a patio screening project, it helps to understand a few local realities that affect how your enclosure will perform over time.
Seasonal timing: In Melbourne, the best windows for installation are typically late fall through early spring. Summer installations are still possible, but afternoon thunderstorms can slow work and longer stretches of high humidity make sealants cure more slowly. If you want your patio screened before lovebug season or the peak of mosquito activity, plan ahead and schedule early.
Building codes and wind loads: Our area has specific wind-load requirements due to hurricanes and tropical storms. A properly designed patio screen structure is anchored to concrete and attached to your home in ways that share the load, not just “hanging” from the fascia. Melbourne Screening follows the local code guidelines and uses the right post spacing, beam sizes, and fastening patterns so your enclosure is not the weakest point during a storm.
Drainage and water management: Many existing patios were poured without a screened enclosure in mind. When we design the screen wall and door thresholds, we check where water currently flows off the roof and across the slab. Sometimes we recommend adding gutters, splash blocks, or small concrete transitions so rainwater does not pool inside the screened area. This matters in Melbourne because our sudden downpours can easily overwhelm a poorly thought-out layout.
Sightlines and neighbors: During your design, we will stand on the patio with you and look at your views. If you face the river, a golf course, or a wooded area, we can reduce the number of vertical posts or suggest larger screen panels to preserve your view. In tighter subdivisions, we can use darker bronze framing and darker screen mesh to make your enclosure visually recede so it does not feel like a cage when you are looking out toward neighbors.
Maintenance expectations: Every screen enclosure in Florida will eventually see some mildew, dirt, and pollen buildup. We explain how to gently clean your screens with a garden hose and mild detergent, how often to spray for spiders and wasps around the frame, and what early signs of wear to watch for, such as loose spline or a sagging panel. A small repair caught early is far cheaper than waiting until several panels fail at once.
Why choose Melbourne Screening for your patio screening project
There are plenty of companies that can stretch screen material, but not all focus on the details that matter long term for Melbourne, FL homeowners. Melbourne Screening combines local experience with a straightforward process so you know what you are getting.
Local expertise: We work almost exclusively in the Melbourne and central Brevard area, so we see the same weather patterns, neighborhood layouts, and builder patio designs again and again. We know which screen materials hold up best near the river, which roof tie-in methods work on specific local home models, and what HOAs commonly approve.
Clear communication on scope and price: During your estimate, we will separate out costs for frame work, screen type upgrades, doors, and any surface preparation rather than giving one lump number with no explanation. That lets you decide whether, for example, upgrading to pet screen now is worth it or if you want to keep things basic and re-screen later if needed.
Respectful on-site work: When we install, we protect nearby landscaping where we can, keep our cutting area organized, and clean up aluminum shavings and old screen scraps before we leave. On multi-day jobs, we secure the area each evening so children and pets are not tempted to play with partially installed sections.
Support after installation: If you notice something that does not seem right after you start using your new screened patio, we want to hear about it. We can adjust door closers, tighten a panel that settled after a storm, or touch up sealant as needed. We want your patio screening to be a space you are proud to show guests, not just a box checked off during a remodel.
If you are ready to turn your bug-prone patio into a comfortable screened living area, reach out to Melbourne Screening. We will walk you through practical options, realistic timelines, and pricing so you can make a confident decision for your home.
